avahi-autoipd.actionSection: Maintenance Commands (8)
Index Return to Main Contents
NAMEavahi-autoipd.action - avahi-autoipd action script
DESCRIPTIONavahi-autoipd.action is the action script that is called whenever an IP address has been acquired by avahi-autoipd or when it detected an IP address conflict. The script should add or remove the specified address from the specified network interface.
- argv An event string: one of BIND, CONFLICT, UNBIND or STOP. If BIND is passed an IP address has been sucessfully acquired and the script shall add it to the network interface. If CONFLICT is passed avahi-autopid detected a IP address on the local network, the action script should remove the configured IP address. If UNBIND is passed the IP address should be removed from the interface, too, because a routable address has been configured to the interface by some other program. If STOP is passed the avahi-autoipd is being shutdown and the action script should remove the IP address. In short: on BIND the address should be added to the interface, on CONFLICT, UNBIND or STOP it should be removed.
- argv The network interface name.
- argv An IP address from the IPv4LL range.
AUTHORSThe Avahi Developers <avahi (at) lists (dot) freedesktop (dot) org>; Avahi is available from http://avahi.org/
SEE ALSOavahi-autoipd(8), dhclient-script(8), ip(8), ifconfig(8)
COMMENTSThis man page was written using xml2man(1) by Oliver Kurth.
This document was created by man2html, using the manual pages.
Time: 05:34:24 GMT, December 24, 2015