SUDOERSSection: MAINTENANCE COMMANDS (5)
Updated: January 12, 2011
Index Return to Main Contents
NAMEsudoers - list of which users may execute what
DESCRIPTIONThe sudoers file is composed of two types of entries: aliases (basically variables) and user specifications (which specify who may run what).
When multiple entries match for a user, they are applied in order. Where there are multiple matches, the last match is used (which is not necessarily the most specific match).
Quick guide to EBNFEBNF is a concise and exact way of describing the grammar of a language. Each EBNF definition is made up of production rules. E.g.,
symbol ::= definition | alternate1 | alternate2 ...
Each production rule references others and thus makes up a grammar for the language. EBNF also contains the following operators, which many readers will recognize from regular expressions. Do not, however, confuse them with ``wildcard'' characters, which have different meanings.
- Means that the preceding symbol (or group of symbols) is optional. That is, it may appear once or not at all.
- Means that the preceding symbol (or group of symbols) may appear zero or more times.
- Means that the preceding symbol (or group of symbols) may appear one or more times.
AliasesThere are four kinds of aliases: User_Alias
Alias ::= 'User_Alias' User_Alias (':' User_Alias)* | 'Runas_Alias' Runas_Alias (':' Runas_Alias)* | 'Host_Alias' Host_Alias (':' Host_Alias)* | 'Cmnd_Alias' Cmnd_Alias (':' Cmnd_Alias)* User_Alias ::= NAME '=' User_List Runas_Alias ::= NAME '=' Runas_List Host_Alias ::= NAME '=' Host_List Cmnd_Alias ::= NAME '=' Cmnd_List NAME ::= [A-Z]([A-Z][0-9]_)*
Each alias definition is of the form
Alias_Type NAME = item1, item2, ...
where Alias_Type is one of
, or Cmnd_Alias
. A NAME
is a string of uppercase letters, numbers, and underscore characters ('_'). A NAME
must start with an uppercase letter. It is possible to put several alias definitions of the same type on a single line, joined by a colon (':'). E.g.,
Alias_Type NAME = item1, item2, item3 : NAME = item4, item5
The definitions of what constitutes a valid alias member follow.
User_List ::= User | User ',' User_List User ::= '!'* user name | '!'* '#'uid | '!'* '%'group | '!'* '+'netgroup | '!'* '%:'nonunix_group | '!'* User_Alias
is made up of one or more user names, uids (prefixed with '#'), system groups (prefixed with '%'), netgroups (prefixed with '+') and User_Alias
es. Each list item may be prefixed with zero or more '!' operators. An odd number of '!' operators negate the value of the item; an even number just cancel each other out.
may be enclosed in double quotes to avoid the need for escaping special characters. Alternately, special characters may be specified in escaped hex mode, e.g. \x20 for space.
syntax depends on the underlying implementation. For instance, the QAS AD backend supports the following formats:
- Group in the same domain: ``Group Name''
- Group in any domain: ``Group Name@FULLY.QUALIFIED.DOMAIN''
- Group SID: ``S-1-2-34-5678901234-5678901234-5678901234-567''
Note that quotes around group names are optional. Unquoted strings must use a backslash (\) to escape spaces and the '@' symbol.
Runas_List ::= Runas_Member | Runas_Member ',' Runas_List Runas_Member ::= '!'* user name | '!'* '#'uid | '!'* '%'group | '!'* +netgroup | '!'* Runas_Alias
is similar to a User_List
except that instead of User_Alias
es it can contain Runas_Alias
es. Note that user names and groups are matched as strings. In other words, two users (groups) with the same uid (gid) are considered to be distinct. If you wish to match all user names with the same uid (e.g. root and toor), you can use a uid instead (#0 in the example given).
Host_List ::= Host | Host ',' Host_List Host ::= '!'* host name | '!'* ip_addr | '!'* network(/netmask)? | '!'* '+'netgroup | '!'* Host_Alias
is made up of one or more host names, IP addresses, network numbers, netgroups (prefixed with '+') and other aliases. Again, the value of an item may be negated with the '!' operator. If you do not specify a netmask along with the network number, sudo will query each of the local host's network interfaces and, if the network number corresponds to one of the hosts's network interfaces, the corresponding netmask will be used. The netmask may be specified either in standard IP address notation (e.g. 255.255.255.0 or ffff:ffff:ffff:ffff::), or CIDR notation (number of bits, e.g. 24 or 64). A host name may include shell-style wildcards (see the Wildcards section below), but unless the host name
command on your machine returns the fully qualified host name, you'll need to use the fqdn option for wildcards to be useful. Note sudo only inspects actual network interfaces; this means that IP address 127.0.0.1 (localhost) will never match. Also, the host name ``localhost'' will only match if that is the actual host name, which is usually only the case for non-networked systems.
Cmnd_List ::= Cmnd | Cmnd ',' Cmnd_List commandname ::= file name | file name args | file name '""' Cmnd ::= '!'* commandname | '!'* directory | '!'* "sudoedit" | '!'* Cmnd_Alias
is a list of one or more commandnames, directories, and other aliases. A commandname is a fully qualified file name which may include shell-style wildcards (see the Wildcards section below). A simple file name allows the user to run the command with any arguments he/she wishes. However, you may also specify command line arguments (including wildcards). Alternately, you can specify "" to indicate that the command may only be run without command line arguments. A directory is a fully qualified path name ending in a '/'. When you specify a directory in a Cmnd_List
, the user will be able to run any file within that directory (but not in any subdirectories therein).
has associated command line arguments, then the arguments in the Cmnd
must match exactly those given by the user on the command line (or match the wildcards if there are any). Note that the following characters must be escaped with a '\' if they are used in command arguments: ',', ':', '=', '\'. The special command "sudoedit" is used to permit a user to run sudo with the -e option (or as sudoedit). It may take command line arguments just as a normal command does.
DefaultsCertain configuration options may be changed from their default values at runtime via one or more Default_Entry
lines. These may affect all users on any host, all users on a specific host, a specific user, a specific command, or commands being run as a specific user. Note that per-command entries may not include command line arguments. If you need to specify arguments, define a Cmnd_Alias
and reference that instead.
Default_Type ::= 'Defaults' | 'Defaults' '@' Host_List | 'Defaults' ':' User_List | 'Defaults' '!' Cmnd_List | 'Defaults' '>' Runas_List Default_Entry ::= Default_Type Parameter_List Parameter_List ::= Parameter | Parameter ',' Parameter_List Parameter ::= Parameter '=' Value | Parameter '+=' Value | Parameter '-=' Value | '!'* Parameter
Parameters may be flags, integer values, strings, or lists.
Flags are implicitly boolean and can be turned off via the '!'
operator. Some integer, string and list parameters may also be
used in a boolean context to disable them. Values may be enclosed
in double quotes (
) when they contain multiple words. Special characters may be escaped with a backslash ( \
Lists have two additional assignment operators,
. These operators are used to add to and delete from a list respectively. It is not an error to use the -=
operator to remove an element that does not exist in a list.
Defaults entries are parsed in the following order: generic, host and user Defaults first, then runas Defaults and finally command defaults.
User_Spec ::= User_List Host_List '=' Cmnd_Spec_List \ (':' Host_List '=' Cmnd_Spec_List)* Cmnd_Spec_List ::= Cmnd_Spec | Cmnd_Spec ',' Cmnd_Spec_List Cmnd_Spec ::= Runas_Spec? SELinux_Spec? Tag_Spec* Cmnd Runas_Spec ::= '(' Runas_List? (':' Runas_List)? ')' SELinux_Spec ::= ('ROLE=role' | 'TYPE=type') Tag_Spec ::= ('NOPASSWD:' | 'PASSWD:' | 'NOEXEC:' | 'EXEC:' | 'SETENV:' | 'NOSETENV:' | 'LOG_INPUT:' | 'NOLOG_INPUT:' | 'LOG_OUTPUT:' | 'NOLOG_OUTPUT:')
A user specification determines which commands a user may run (and as what user) on specified hosts. By default, commands are run as root, but this can be changed on a per-command basis.
determines the user and/or the group that a command may be run as. A fully-specified Runas_Spec
consists of two Runas_List
s (as defined above) separated by a colon (':') and enclosed in a set of parentheses. The first Runas_List
indicates which users the command may be run as via sudo's -u option. The second defines a list of groups that can be specified via sudo's -g option. If both Runas_List
s are specified, the command may be run with any combination of users and groups listed in their respective Runas_List
s. If only the first is specified, the command may be run as any user in the list but no -g option may be specified. If the first Runas_List
is empty but the second is specified, the command may be run as the invoking user with the group set to any listed in the Runas_List
. If no Runas_Spec
is specified the command may be run as root and no group may be specified.
sets the default for the commands that follow it. What this means is that for the entry:
dgb boulder = (operator) /bin/ls, /bin/kill, /usr/bin/lprm
The user dgb may run /bin/ls, /bin/kill, and /usr/bin/lprm --- but only as operator. E.g.,
$ sudo -u operator /bin/ls.
It is also possible to override a
later on in an entry. If we modify the entry like so:
dgb boulder = (operator) /bin/ls, (root) /bin/kill, /usr/bin/lprm
Then user dgb is now allowed to run /bin/ls as operator, but /bin/kill and /usr/bin/lprm as root.
We can extend this to allow dgb to run
with either the user or group set to operator:
dgb boulder = (operator : operator) /bin/ls, (root) /bin/kill, \ /usr/bin/lprm
In the following example, user tcm may run commands that access a modem device file with the dialer group. Note that in this example only the group will be set, the command still runs as user tcm.
tcm boulder = (:dialer) /usr/bin/tip, /usr/bin/cu, \ /usr/local/bin/minicom
SELinux_SpecOn systems with SELinux support, sudoers entries may optionally have an SELinux role and/or type associated with a command. If a role or type is specified with the command it will override any default values specified in sudoers. A role or type specified on the command line, however, will supercede the values in sudoers.
Tag_SpecA command may have zero or more tags associated with it. There are eight possible tag values, NOPASSWD
. Once a tag is set on a Cmnd
, subsequent Cmnd
s in the Cmnd_Spec_List
, inherit the tag unless it is overridden by the opposite tag (i.e.: PASSWD
By default, sudo requires that a user authenticate him or herself
before running a command. This behavior can be modified via the
tag. Like a Runas_Spec
, the NOPASSWD
tag sets a default for the commands that follow it in the Cmnd_Spec_List
. Conversely, the PASSWD
tag can be used to reverse things. For example:
ray rushmore = NOPASSWD: /bin/kill, /bin/ls, /usr/bin/lprm
would allow the user ray to run /bin/kill, /bin/ls, and /usr/bin/lprm as root on the machine rushmore without authenticating himself. If we only want ray to be able to run /bin/kill without a password the entry would be:
ray rushmore = NOPASSWD: /bin/kill, PASSWD: /bin/ls, /usr/bin/lprm
Note, however, that the
tag has no effect on users who are in the group specified by the exempt_group option.
By default, if the
tag is applied to any of the entries for a user on the current host, he or she will be able to run sudo -l
without a password. Additionally, a user may only run sudo -v
without a password if the NOPASSWD
tag is present for all a user's entries that pertain to the current host. This behavior may be overridden via the verifypw and listpw options.
If sudo has been compiled with noexec support and the underlying
operating system supports it, the
tag can be used to prevent a dynamically-linked executable from running further commands itself.
In the following example, user aaron may run /usr/bin/more and /usr/bin/vi but shell escapes will be disabled.
aaron shanty = NOEXEC: /usr/bin/more, /usr/bin/vi
See the ``PREVENTING SHELL ESCAPES'' section below for more details
works and whether or not it will work on your system.
These tags override the value of the setenv option on a per-command
basis. Note that if
has been set for a command, any environment variables set on the command line way are not subject to the restrictions imposed by env_check, env_delete, or env_keep. As such, only trusted users should be allowed to set variables in this manner. If the command matched is ALL, the SETENV
tag is implied for that command; this default may be overridden by use of the NOSETENV
These tags override the value of the log_input option on a per-command basis. For more information, see the description of log_input in the ``SUDOERS OPTIONS'' section below.
Wildcardssudo allows shell-style wildcards (aka meta or glob characters) to be used in host names, path names and command line arguments in the sudoers file. Wildcard matching is done via the POSIX glob(3) and fnmatch(3) routines. Note that these are not regular expressions.
- Matches any set of zero or more characters.
- Matches any single character.
- Matches any character in the specified range.
- Matches any character not in the specified range.
- For any character ``x'', evaluates to ``x''. This is used to escape special characters such as: ``*'', ``?'', ``['', and ``}''.
POSIX character classes may also be used if your system's glob(3) and fnmatch(3) functions support them. However, because the ':' character has special meaning in sudoers, it must be escaped. For example:
Would match any file name beginning with a letter.
Note that a forward slash ('/') will not be matched by wildcards used in the path name. When matching the command line arguments, however, a slash does get matched by wildcards. This is to make a path like:
Exceptions to wildcard rulesThe following exceptions apply to the above rules:
- If the empty string "" is the only command line argument in the sudoers entry it means that command is not allowed to be run with any arguments.
Including other files from within sudoersIt is possible to include other sudoers files from within the sudoers file currently being parsed using the #include
This can be used, for example, to keep a site-wide sudoers file in addition to a local, per-machine file. For the sake of this example the site-wide sudoers will be /etc/sudoers and the per-machine one will be /etc/sudoers.local. To include /etc/sudoers.local from within /etc/sudoers we would use the following line in /etc/sudoers:
When sudo reaches this line it will suspend processing of the current file (/etc/sudoers) and switch to /etc/sudoers.local. Upon reaching the end of /etc/sudoers.local, the rest of /etc/sudoers will be processed. Files that are included may themselves include other files. A hard limit of 128 nested include files is enforced to prevent include file loops.
The file name may include the %h escape, signifying the short form of the host name. I.e., if the machine's host name is ``xerxes'', then
will cause sudo to include the file /etc/sudoers.xerxes.
directive can be used to create a sudoers.d directory that the system package manager can drop sudoers rules into as part of package installation. For example, given:
sudo will read each file in /etc/sudoers.d, skipping file
names that end in
or contain a .
character to avoid causing problems with package manager or editor temporary/backup files. Files are parsed in sorted lexical order. That is, /etc/sudoers.d/01_first will be parsed before /etc/sudoers.d/10_second. Be aware that because the sorting is lexical, not numeric, /etc/sudoers.d/1_whoops would be loaded after /etc/sudoers.d/10_second. Using a consistent number of leading zeroes in the file names can be used to avoid such problems.
Note that unlike files included via
, visudo will not edit the files in a #includedir
directory unless one of them contains a syntax error. It is still possible to run visudo with the -f
flag to edit the files directly.
Other special characters and reserved wordsThe pound sign ('#') is used to indicate a comment (unless it is part of a #include directive or unless it occurs in the context of a user name and is followed by one or more digits, in which case it is treated as a uid). Both the comment character and any text after it, up to the end of the line, are ignored.
The reserved word ALL is a built-in alias that always causes
a match to succeed. It can be used wherever one might otherwise
, or Host_Alias
. You should not try to define your own alias called ALL as the built-in alias will be used in preference to your own. Please note that using ALL can be dangerous since in a command context, it allows the user to run any command on the system.
An exclamation point ('!') can be used as a logical not operator
both in an alias and in front of a
. This allows one to exclude certain values. Note, however, that using a !
in conjunction with the built-in ALL
alias to allow a user to run ``all but a few'' commands rarely works as intended (see SECURITY NOTES below).
Long lines can be continued with a backslash ('\') as the last character on the line.
Whitespace between elements in a list as well as special syntactic characters in a User Specification ('=', ':', '(', ')') is optional.
SUDOERS OPTIONSsudo's behavior can be modified by Default_Entry
lines, as explained earlier. A list of all supported Defaults parameters, grouped by type, are listed below.
If enabled, sudo will set the
environment variable to the home directory of the target user (which is root unless the -u option is used). This effectively means that the -H option is always implied. Note that HOME
is already set when the the env_reset option is enabled, so always_set_home is only effective for configurations where env_reset is disabled. This flag is off by default.
If set, users must authenticate themselves via a password (or other
means of authentication) before they may run commands. This default
may be overridden via the
tags. This flag is on by default.
- If set, the user may use sudo's -C option which overrides the default starting point at which sudo begins closing open file descriptors. This flag is off by default.
- If set, and sudo is configured to log a command's input or output, the I/O logs will be compressed using zlib. This flag is on by default when sudo is compiled with zlib support.
If set, visudo will use the value of the EDITOR or VISUAL
environment variables before falling back on the default editor list.
Note that this may create a security hole as it allows the user to
run any arbitrary command as root without logging. A safer alternative
is to place a colon-separated list of editors in the
variable. visudo will then only use the EDITOR or VISUAL if they match a value specified in editor
. This flag is on by default.
If set, sudo will reset the environment to only contain the
LOGNAME, MAIL, SHELL, USER, USERNAME and the
variables. Any variables in the caller's environment that match the env_keep
lists are then added. The default contents of the env_keep
lists are displayed when sudo is run by root with the -V option. If the secure_path option is set, its value will be used for the PATH
environment variable. This flag is on by default.
- Normally, sudo uses the glob(3) function to do shell-style globbing when matching path names. However, since it accesses the file system, glob(3) can take a long time to complete for some patterns, especially when the pattern references a network file system that is mounted on demand (automounted). The fast_glob option causes sudo to use the fnmatch(3) function, which does not access the file system to do its matching. The disadvantage of fast_glob is that it is unable to match relative path names such as ./ls or ../bin/ls. This has security implications when path names that include globbing characters are used with the negation operator, '!', as such rules can be trivially bypassed. As such, this option should not be used when sudoers contains rules that contain negated path names which include globbing characters. This flag is off by default.
Set this flag if you want to put fully qualified host names in the
sudoers file. I.e., instead of myhost you would use myhost.mydomain.edu.
You may still use the short form if you wish (and even mix the two).
Beware that turning on fqdn requires sudo to make DNS lookups
which may make sudo unusable if DNS stops working (for example
if the machine is not plugged into the network). Also note that
you must use the host's official name as DNS knows it. That is,
you may not use a host alias (
entry) due to performance issues and the fact that there is no way to get all aliases from DNS. If your machine's host name (as returned by the hostname
command) is already fully qualified you shouldn't need to set fqdn. This flag is off by default.
If set, sudo will ignore '.' or '' (current dir) in the
environment variable; the PATH
itself is not modified. This flag is on by default.
If set via LDAP, parsing of /etc/sudoers will be skipped.
This is intended for Enterprises that wish to prevent the usage of local
sudoers files so that only LDAP is used. This thwarts the efforts of
rogue operators who would attempt to add roles to /etc/sudoers.
When this option is present, /etc/sudoers does not even need to
exist. Since this option tells sudo how to behave when no specific LDAP
entries have been matched, this sudoOption is only meaningful for the
section. This flag is off by default.
- If set, sudo will insult users when they enter an incorrect password. This flag is off by default.
- If set, the host name will be logged in the (non-syslog) sudo log file. This flag is off by default.
- If set, the four-digit year will be logged in the (non-syslog) sudo log file. This flag is off by default.
- When validating with a One Time Password (OPT) scheme such as S/Key or OPIE, a two-line prompt is used to make it easier to cut and paste the challenge to a local window. It's not as pretty as the default but some people find it more convenient. This flag is off by default.
- Send mail to the mailto user every time a users runs sudo. This flag is off by default.
- Send mail to the mailto user if the user running sudo does not enter the correct password. This flag is off by default.
- If set, mail will be sent to the mailto user if the invoking user exists in the sudoers file, but is not allowed to run commands on the current host. This flag is off by default.
- If set, mail will be sent to the mailto user if the invoking user is allowed to use sudo but the command they are trying is not listed in their sudoers file entry or is explicitly denied. This flag is off by default.
- If set, mail will be sent to the mailto user if the invoking user is not in the sudoers file. This flag is on by default.
If set, all commands run via sudo will behave as if the
tag has been set, unless overridden by a EXEC
tag. See the description of NOEXEC and EXEC below as well as the ``PREVENTING SHELL ESCAPES'' section at the end of this manual. This flag is off by default.
Normally, sudo will tell the user when a command could not be
found in their
environment variable. Some sites may wish to disable this as it could be used to gather information on the location of executables that the normal user does not have access to. The disadvantage is that if the executable is simply not in the user's PATH
, sudo will tell the user that they are not allowed to run it, which can be confusing. This flag is on by default.
- The password prompt specified by passprompt will normally only be used if the password prompt provided by systems such as PAM matches the string ``Password:''. If passprompt_override is set, passprompt will always be used. This flag is off by default.
- By default, sudo will initialize the group vector to the list of groups the target user is in. When preserve_groups is set, the user's existing group vector is left unaltered. The real and effective group IDs, however, are still set to match the target user. This flag is off by default.
- By default, sudo reads the password like most other Unix programs, by turning off echo until the user hits the return (or enter) key. Some users become confused by this as it appears to them that sudo has hung at this point. When pwfeedback is set, sudo will provide visual feedback when the user presses a key. Note that this does have a security impact as an onlooker may be able to determine the length of the password being entered. This flag is off by default.
- If set, sudo will only run when the user is logged in to a real tty. When this flag is set, sudo can only be run from a login session and not via other means such as cron(8) or cgi-bin scripts. This flag is off by default.
- If set, root is allowed to run sudo too. Disabling this prevents users from ``chaining'' sudo commands to get a root shell by doing something like "sudo sudo /bin/sh". Note, however, that turning off root_sudo will also prevent root from running sudoedit. Disabling root_sudo provides no real additional security; it exists purely for historical reasons. This flag is on by default.
- If set, sudo will prompt for the root password instead of the password of the invoking user. This flag is off by default.
If set, sudo will prompt for the password of the user defined by the
runas_default option (defaults to
) instead of the password of the invoking user. This flag is off by default.
If enabled and sudo is invoked with the -s option the
environment variable will be set to the home directory of the target user (which is root unless the -u option is used). This effectively makes the -s option imply -H. Note that HOME
is already set when the the env_reset option is enabled, so set_home is only effective for configurations where env_reset is disabled. This flag is off by default.
Normally, sudo will set the
environment variables to the name of the target user (usually root unless the -u option is given). However, since some programs (including the RCS revision control system) use LOGNAME
to determine the real identity of the user, it may be desirable to change this behavior. This can be done by negating the set_logname option. Note that if the env_reset option has not been disabled, entries in the env_keep list will override the value of set_logname. This flag is on by default.
- Allow the user to disable the env_reset option from the command line. Additionally, environment variables set via the command line are not subject to the restrictions imposed by env_check, env_delete, or env_keep. As such, only trusted users should be allowed to set variables in this manner. This flag is off by default.
If set and sudo is invoked with no arguments it acts as if the
-s option had been given. That is, it runs a shell as root (the
shell is determined by the
environment variable if it is set, falling back on the shell listed in the invoking user's /etc/passwd entry if not). This flag is off by default.
- Normally, when sudo executes a command the real and effective UIDs are set to the target user (root by default). This option changes that behavior such that the real UID is left as the invoking user's UID. In other words, this makes sudo act as a setuid wrapper. This can be useful on systems that disable some potentially dangerous functionality when a program is run setuid. This option is only effective on systems with either the setreuid() or setresuid() function. This flag is off by default.
If set, sudo will prompt for the password of the user specified
by the -u option (defaults to
) instead of the password of the invoking user. In addition, the timestamp file name will include the target user's name. Note that this flag precludes the use of a uid not listed in the passwd database as an argument to the -u option. This flag is off by default.
If set, sudo will run the command in a pseudo tty and log all
If the standard input is not connected to the user's tty, due to
I/O redirection or because the command is part of a pipeline, that
input is also captured and stored in a separate log file.
Input is logged to the /var/log/sudo-io directory using a unique session ID that is included in the normal sudo log line, prefixed with TSID=.
If set, sudo will run the command in a pseudo tty and log all
output that is sent to the screen, similar to the script(1) command.
If the standard output or standard error is not connected to the
user's tty, due to I/O redirection or because the command is part
of a pipeline, that output is also captured and stored in separate
Output is logged to the /var/log/sudo-io directory using a unique session ID that is included in the normal sudo log line, prefixed with TSID=.
Output logs may be viewed with the sudoreplay(8) utility, which can also be used to list or search the available logs.
- If set, users must authenticate on a per-tty basis. With this flag enabled, sudo will use a file named for the tty the user is logged in on in the user's time stamp directory. If disabled, the time stamp of the directory is used instead. This flag is on by default.
- If set, sudo will set the umask as specified by sudoers without modification. This makes it possible to specify a more permissive umask in sudoers than the user's own umask and matches historical behavior. If umask_override is not set, sudo will set the umask to be the union of the user's umask and what is specified in sudoers. This flag is off by default.
- If set, sudo will run the command in a pseudo-pty even if no I/O logging is being gone. A malicious program run under sudo could conceivably fork a background process that retains to the user's terminal device after the main program has finished executing. Use of this option will make that impossible.
- By default, sudo will refuse to run if the user must enter a password but it is not possible to disable echo on the terminal. If the visiblepw flag is set, sudo will prompt for a password even when it would be visible on the screen. This makes it possible to run things like "rsh somehost sudo ls" since rsh(1) does not allocate a tty. This flag is off by default.
- Before it executes a command, sudo will close all open file descriptors other than standard input, standard output and standard error (ie: file descriptors 0-2). The closefrom option can be used to specify a different file descriptor at which to start closing. The default is 3.
The number of tries a user gets to enter his/her password before
sudo logs the failure and exits. The default is
Integers that can be used in a boolean context:
Number of characters per line for the file log. This value is used
to decide when to wrap lines for nicer log files. This has no
effect on the syslog log file, only the file log. The default is
(use 0 or negate the option to disable word wrap).
Number of minutes before the sudo password prompt times out, or
0 for no timeout. The timeout may include a fractional component
if minute granularity is insufficient, for example 2.5. The
Number of minutes that can elapse before sudo will ask for a
passwd again. The timeout may include a fractional component if
minute granularity is insufficient, for example 2.5. The default
. Set this to 0 to always prompt for a password. If set to a value less than 0 the user's timestamp will never expire. This can be used to allow users to create or delete their own timestamps via sudo -v
and sudo -k
Umask to use when running the command. Negate this option or set
it to 0777 to preserve the user's umask. The actual umask that is
used will be the union of the user's umask and the value of the
umask option, which defaults to
. This guarantees that sudo never lowers the umask when running a command. Note on systems that use PAM, the default PAM configuration may specify its own umask which will override the value set in sudoers.
Message that is displayed if a user enters an incorrect password.
The default is
Sorry, try again.
unless insults are enabled.
- A colon (':') separated list of editors allowed to be used with visudo. visudo will choose the editor that matches the user's EDITOR environment variable if possible, or the first editor in the list that exists and is executable. The default is "/bin/vi".
Subject of the mail sent to the mailto user. The escape %h
will expand to the host name of the machine.
*** SECURITY information for %h ***
Path to a shared library containing dummy versions of the execv(),
execve() and fexecve() library functions that just return an error.
This is used to implement the noexec functionality on systems that
or its equivalent. Defaults to /usr/libexec/sudo_noexec.so.
The default prompt to use when asking for a password; can be overridden
via the -p option or the
environment variable. The following percent (` %
') escapes are supported:
- expanded to the local host name including the domain name (on if the machine's host name is fully qualified or the fqdn option is set)
- expanded to the local host name without the domain name
- expanded to the user whose password is being asked for (respects the rootpw, targetpw and runaspw flags in sudoers)
- expanded to the login name of the user the command will be run as (defaults to root)
- expanded to the invoking user's login name
characters are collapsed into a single %
The default value is [sudo] password for %p:
- The default SELinux role to use when constructing a new security context to run the command. The default role may be overridden on a per-command basis in sudoers or via command line options. This option is only available whe sudo is built with SELinux support.
The default user to run commands as if the -u option is not specified
on the command line. This defaults to
. Note that if runas_default is set it must occur before any Runas_Alias
Syslog priority to use when user authenticates unsuccessfully.
Syslog priority to use when user authenticates successfully.
- Locale to use when parsing the sudoers file. Note that changing the locale may affect how sudoers is interpreted. Defaults to "C".
- The directory in which sudo stores its timestamp files. The default is /var/db/sudo.
The owner of the timestamp directory and the timestamps stored therein.
The default is
- The default SELinux type to use when constructing a new security context to run the command. The default type may be overridden on a per-command basis in sudoers or via command line options. This option is only available whe sudo is built with SELinux support.
Strings that can be used in a boolean context:
The askpass option specifies the fully qualified path to a helper
program used to read the user's password when no terminal is
available. This may be the case when sudo is executed from a
graphical (as opposed to text-based) application. The program
specified by askpass should display the argument passed to it
as the prompt and write the user's password to the standard output.
The value of askpass may be overridden by the
The env_file options specifies the fully qualified path to a
file containing variables to be set in the environment of the program
being run. Entries in this file should either be of the form
or export VARIABLE=value
. The value may optionally be surrounded by single or double quotes. Variables in this file are subject to other sudo environment settings such as env_keep and env_check.
- Users in this group are exempt from password and PATH requirements. This is not set by default.
This option controls when a short lecture will be printed along with
the password prompt. It has the following possible values:
If no value is specified, a value of once is implied. Negating the option results in a value of never being used. The default value is once.
- Path to a file containing an alternate sudo lecture that will be used in place of the standard lecture if the named file exists. By default, sudo uses a built-in lecture.
This option controls when a password will be required when a
user runs sudo with the -l option. It has the following possible values:
All the user's sudoers entries for the current host must have
flag set to avoid entering a password.
- The user must always enter a password to use the -l option.
At least one of the user's sudoers entries for the current host
must have the
flag set to avoid entering a password.
- The user need never enter a password to use the -l option.
If no value is specified, a value of any is implied. Negating the option results in a value of never being used. The default value is any.
- Path to the sudo log file (not the syslog log file). Setting a path turns on logging to a file; negating this option turns it off. By default, sudo logs via syslog.
- Flags to use when invoking mailer. Defaults to -t.
- Path to mail program used to send warning mail. Defaults to the path to sendmail found at configure time.
Address to use for the ``from'' address when sending warning and error
mail. The address should be enclosed in double quotes (
) to protect against sudo interpreting the @
sign. Defaults to the name of the user running sudo.
Address to send warning and error mail to. The address should
be enclosed in double quotes (
) to protect against sudo interpreting the @
sign. Defaults to root
Path used for every command run from sudo. If you don't trust the
people running sudo to have a sane
environment variable you may want to use this. Another use is if you want to have the ``root path'' be separate from the ``user path.'' Users in the group specified by the exempt_group option are not affected by secure_path. This option is not set by default.
Syslog facility if syslog is being used for logging (negate to
disable syslog logging). Defaults to
This option controls when a password will be required when a user runs
sudo with the -v option. It has the following possible values:
All the user's sudoers entries for the current host must have
flag set to avoid entering a password.
- The user must always enter a password to use the -v option.
At least one of the user's sudoers entries for the current host
must have the
flag set to avoid entering a password.
- The user need never enter a password to use the -v option.
If no value is specified, a value of all is implied. Negating the option results in a value of never being used. The default value is all.
Lists that can be used in a boolean context:
Environment variables to be removed from the user's environment if
the variable's value contains
characters. This can be used to guard against printf-style format vulnerabilities in poorly-written programs. The argument may be a double-quoted, space-separated list or a single value without double-quotes. The list can be replaced, added to, deleted from, or disabled by using the =
, and !
operators respectively. Regardless of whether the env_reset
option is enabled or disabled, variables specified by env_check
will be preserved in the environment if they pass the aforementioned check. The default list of environment variables to check is displayed when sudo is run by root with the -V option.
Environment variables to be removed from the user's environment
when the env_reset option is not in effect. The argument may
be a double-quoted, space-separated list or a single value without
double-quotes. The list can be replaced, added to, deleted from,
or disabled by using the
, and !
operators respectively. The default list of environment variables to remove is displayed when sudo is run by root with the -V option. Note that many operating systems will remove potentially dangerous variables from the environment of any setuid process (such as sudo).
Environment variables to be preserved in the user's environment
when the env_reset option is in effect. This allows fine-grained
control over the environment sudo-spawned processes will receive.
The argument may be a double-quoted, space-separated list or a
single value without double-quotes. The list can be replaced, added
to, deleted from, or disabled by using the
, and !
operators respectively. The default list of variables to keep is displayed when sudo is run by root with the -V option.
When logging via syslog(3), sudo accepts the following values for the syslog facility (the value of the syslog Parameter): authpriv (if your OS supports it), auth, daemon, user, local0, local1, local2, local3, local4, local5, local6, and local7. The following syslog priorities are supported: alert, crit, debug, emerg, err, info, notice, and warning.
- List of who can run what
- Local groups file
- List of network groups
- I/O log files
EXAMPLESBelow are example sudoers entries. Admittedly, some of these are a bit contrived. First, we allow a few environment variables to pass and then define our aliases:
# Run X applications through sudo; HOME is used to find the # .Xauthority file. Note that other programs use HOME to find # configuration files and this may lead to privilege escalation! Defaults env_keep += "DISPLAY HOME" # User alias specification User_Alias FULLTIMERS = millert, mikef, dowdy User_Alias PARTTIMERS = bostley, jwfox, crawl User_Alias WEBMASTERS = will, wendy, wim # Runas alias specification Runas_Alias OP = root, operator Runas_Alias DB = oracle, sybase Runas_Alias ADMINGRP = adm, oper # Host alias specification Host_Alias SPARC = bigtime, eclipse, moet, anchor :\ SGI = grolsch, dandelion, black :\ ALPHA = widget, thalamus, foobar :\ HPPA = boa, nag, python Host_Alias CUNETS = 220.127.116.11/255.255.0.0 Host_Alias CSNETS = 18.104.22.168, 22.214.171.124/24, 126.96.36.199 Host_Alias SERVERS = master, mail, www, ns Host_Alias CDROM = orion, perseus, hercules # Cmnd alias specification Cmnd_Alias DUMPS = /usr/bin/mt, /usr/sbin/dump, /usr/sbin/rdump,\ /usr/sbin/restore, /usr/sbin/rrestore Cmnd_Alias KILL = /usr/bin/kill Cmnd_Alias PRINTING = /usr/sbin/lpc, /usr/bin/lprm Cmnd_Alias SHUTDOWN = /usr/sbin/shutdown Cmnd_Alias HALT = /usr/sbin/halt Cmnd_Alias REBOOT = /usr/sbin/reboot Cmnd_Alias SHELLS = /usr/bin/sh, /usr/bin/csh, /usr/bin/ksh, \ /usr/local/bin/tcsh, /usr/bin/rsh, \ /usr/local/bin/zsh Cmnd_Alias SU = /usr/bin/su Cmnd_Alias PAGERS = /usr/bin/more, /usr/bin/pg, /usr/bin/less
Here we override some of the compiled in default values. We want
sudo to log via syslog(3) using the auth facility in all
cases. We don't want to subject the full time staff to the sudo
lecture, user millert need not give a password, and we don't
want to reset the
environment variables when running commands as root. Additionally, on the machines in the SERVERS Host_Alias
, we keep an additional local log file and make sure we log the year in each log line since the log entries will be kept around for several years. Lastly, we disable shell escapes for the commands in the PAGERS Cmnd_Alias
(/usr/bin/more, /usr/bin/pg and /usr/bin/less).
# Override built-in defaults Defaults syslog=auth Defaults>root !set_logname Defaults:FULLTIMERS !lecture Defaults:millert !authenticate Defaults@SERVERS log_year, logfile=/var/log/sudo.log Defaults!PAGERS noexec
The User specification is the part that actually determines who may run what.
root ALL = (ALL) ALL %wheel ALL = (ALL) ALL
We let root and any user in group wheel run any command on any host as any user.
FULLTIMERS ALL = NOPASSWD: ALL
Full time sysadmins (millert, mikef, and dowdy) may run any command on any host without authenticating themselves.
PARTTIMERS ALL = ALL
Part time sysadmins (bostley, jwfox, and crawl) may run any
command on any host but they must authenticate themselves first
(since the entry lacks the
jack CSNETS = ALL
The user jack may run any command on the machines in the CSNETS alias (the networks 188.8.131.52, 184.108.40.206, and 220.127.116.11). Of those networks, only 18.104.22.168 has an explicit netmask (in CIDR notation) indicating it is a class C network. For the other networks in CSNETS, the local machine's netmask will be used during matching.
lisa CUNETS = ALL
The user lisa may run any command on any host in the CUNETS alias (the class B network 22.214.171.124).
operator ALL = DUMPS, KILL, SHUTDOWN, HALT, REBOOT, PRINTING,\ sudoedit /etc/printcap, /usr/oper/bin/
The operator user may run commands limited to simple maintenance. Here, those are commands related to backups, killing processes, the printing system, shutting down the system, and any commands in the directory /usr/oper/bin/.
joe ALL = /usr/bin/su operator
The user joe may only su(1) to operator.
pete HPPA = /usr/bin/passwd [A-Za-z]*, !/usr/bin/passwd root %opers ALL = (: ADMINGRP) /usr/sbin/
Users in the opers group may run commands in /usr/sbin/ as themselves
with any group in the ADMINGRP
(the adm and oper groups).
The user pete is allowed to change anyone's password except for root on the HPPA machines. Note that this assumes passwd(1) does not take multiple user names on the command line.
bob SPARC = (OP) ALL : SGI = (OP) ALL
The user bob may run anything on the SPARC and SGI machines
as any user listed in the OP
(root and operator).
jim +biglab = ALL
The user jim may run any command on machines in the biglab netgroup. sudo knows that ``biglab'' is a netgroup due to the '+' prefix.
+secretaries ALL = PRINTING, /usr/bin/adduser, /usr/bin/rmuser
Users in the secretaries netgroup need to help manage the printers as well as add and remove users, so they are allowed to run those commands on all machines.
fred ALL = (DB) NOPASSWD: ALL
The user fred can run commands as any user in the DB
(oracle or sybase) without giving a password.
john ALPHA = /usr/bin/su [!-]*, !/usr/bin/su *root*
On the ALPHA machines, user john may su to anyone except root but he is not allowed to specify any options to the su(1) command.
jen ALL, !SERVERS = ALL
The user jen may run any command on any machine except for those
in the SERVERS
(master, mail, www and ns).
jill SERVERS = /usr/bin/, !SU, !SHELLS
For any machine in the SERVERS
, jill may run any commands in the directory /usr/bin/ except for those commands belonging to the SU and SHELLS Cmnd_Aliases
steve CSNETS = (operator) /usr/local/op_commands/
The user steve may run any command in the directory /usr/local/op_commands/ but only as user operator.
matt valkyrie = KILL
On his personal workstation, valkyrie, matt needs to be able to kill hung processes.
WEBMASTERS www = (www) ALL, (root) /usr/bin/su www
On the host www, any user in the WEBMASTERS
(will, wendy, and wim), may run any command as user www (which owns the web pages) or simply su(1) to www.
ALL CDROM = NOPASSWD: /sbin/umount /CDROM,\ /sbin/mount -o nosuid\,nodev /dev/cd0a /CDROM
Any user may mount or unmount a CD-ROM on the machines in the CDROM
(orion, perseus, hercules) without entering a password. This is a bit tedious for users to type, so it is a prime candidate for encapsulating in a shell script.
SECURITY NOTESIt is generally not effective to ``subtract'' commands from ALL
using the '!' operator. A user can trivially circumvent this by copying the desired command to a different name and then executing that. For example:
bill ALL = ALL, !SU, !SHELLS
Doesn't really prevent bill from running the commands listed in SU or SHELLS since he can simply copy those commands to a different name, or use a shell escape from an editor or other program. Therefore, these kind of restrictions should be considered advisory at best (and reinforced by policy).
Furthermore, if the fast_glob option is in use, it is not possible to reliably negate commands where the path name includes globbing (aka wildcard) characters. This is because the C library's fnmatch(3) function cannot resolve relative paths. While this is typically only an inconvenience for rules that grant privileges, it can result in a security issue for rules that subtract or revoke privileges.
For example, given the following sudoers entry:
john ALL = /usr/bin/passwd [a-zA-Z0-9]*, /usr/bin/chsh [a-zA-Z0-9]*, /usr/bin/chfn [a-zA-Z0-9]*, !/usr/bin/* root
PREVENTING SHELL ESCAPESOnce sudo executes a program, that program is free to do whatever it pleases, including run other programs. This can be a security issue since it is not uncommon for a program to allow shell escapes, which lets a user bypass sudo's access control and logging. Common programs that permit shell escapes include shells (obviously), editors, paginators, mail and terminal programs.
There are two basic approaches to this problem:
- Avoid giving users access to commands that allow the user to run arbitrary commands. Many editors have a restricted mode where shell escapes are disabled, though sudoedit is a better solution to running editors via sudo. Due to the large number of programs that offer shell escapes, restricting users to the set of programs that do not is often unworkable.
Many systems that support shared libraries have the ability to
override default library functions by pointing an environment
) to an alternate shared library. On such systems, sudo's noexec functionality can be used to prevent a program run by sudo from executing any other programs. Note, however, that this applies only to native dynamically-linked executables. Statically-linked executables and foreign executables running under binary emulation are not affected.
To tell whether or not sudo supports noexec, you can run the following as root:
sudo -V | grep "dummy exec"
If the resulting output contains a line that begins with:
File containing dummy exec functions:
then sudo may be able to replace the exec family of functions in the standard library with its own that simply return an error. Unfortunately, there is no foolproof way to know whether or not noexec will work at compile-time. noexec should work on SunOS, Solaris, *BSD, Linux, IRIX, Tru64 UNIX, MacOS X, and HP-UX 11.x. It is known not to work on AIX and UnixWare. noexec is expected to work on most operating systems that support the LD_PRELOAD
environment variable. Check your operating system's manual pages for the dynamic linker (usually ld.so, ld.so.1, dyld, dld.sl, rld, or loader) to see if LD_PRELOAD
To enable noexec for a command, use the NOEXEC
tag as documented in the User Specification section above. Here is that example again:
aaron shanty = NOEXEC: /usr/bin/more, /usr/bin/vi
This allows user aaron to run /usr/bin/more and /usr/bin/vi with noexec enabled. This will prevent those two commands from executing other commands (such as a shell). If you are unsure whether or not your system is capable of supporting noexec you can always just try it out and see if it works.
Note that restricting shell escapes is not a panacea. Programs running as root are still capable of many potentially hazardous operations (such as changing or overwriting files) that could lead to unintended privilege escalation. In the specific case of an editor, a safer approach is to give the user permission to run sudoedit.
SEE ALSOrsh(1), su(1), fnmatch(3), glob(3), sudo(8), visudo(8)
CAVEATSThe sudoers file should always be edited by the visudo command which locks the file and does grammatical checking. It is imperative that sudoers be free of syntax errors since sudo will not run with a syntactically incorrect sudoers file.
When using netgroups of machines (as opposed to users), if you
store fully qualified host name in the netgroup (as is usually the
case), you either need to have the machine's host name be fully qualified
as returned by the
command or use the fqdn option in sudoers.
BUGSIf you feel you have found a bug in sudo, please submit a bug report at http://www.sudo.ws/sudo/bugs/
SUPPORTLimited free support is available via the sudo-users mailing list, see http://www.sudo.ws/mailman/listinfo/sudo-users to subscribe or search the archives.
DISCLAIMERsudo is provided ``AS IS'' and any express or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. See the LICENSE file distributed with sudo or http://www.sudo.ws/sudo/license.html for complete details.
- SUDOERS OPTIONS
- SECURITY NOTES
- PREVENTING SHELL ESCAPES
- SEE ALSO
This document was created by man2html, using the manual pages.
Time: 05:34:00 GMT, December 24, 2015