CACHEFLUSHSection: Linux Programmer's Manual (2)
Index Return to Main Contents
NAMEcacheflush - flush contents of instruction and/or data cache
#include <asm/cachectl.h> int cacheflush(char *addr, int nbytes, int cache);
DESCRIPTIONcacheflush() flushes the contents of the indicated cache(s) for the user addresses in the range addr to (addr+nbytes-1). cache may be one of:
- Flush the instruction cache.
- Write back to memory and invalidate the affected valid cache lines.
- Same as (ICACHE|DCACHE).
RETURN VALUEcacheflush() returns 0 on success or -1 on error. If errors are detected, errno will indicate the error.
- Some or all of the address range addr to (addr+nbytes-1) is not accessible.
- cache is not one of ICACHE, DCACHE, or BCACHE.
CONFORMING TOThis Linux-specific system call is only available on MIPS based systems. It should not be used in programs intended to be portable.
BUGSThe current implementation ignores the addr and nbytes arguments. Therefore, the whole cache is always flushed.
COLOPHONThis page is part of release 3.22 of the Linux man-pages project. A description of the project, and information about reporting bugs, can be found at http://www.kernel.org/doc/man-pages/.
This document was created by man2html, using the manual pages.
Time: 05:33:03 GMT, December 24, 2015